Woodward HighPROTEC MRU4, Руководство пользователя

Страница: 64 / 323

Smart View
Offline Device Planning via Smart view
In order to be able to transmit a parameter file (e.g. offline created) into the
device the following issues must comply:
•
Type Code (written on the top of the device/type label) and
•
Version of the device model (can be found in menu
[Device Parameters\Version].
The Smart view software enables also to parameterize offline. The advantage is: By using device models you
can do planning jobs for a device and set parameters in advance.
You can also read the parameter file out of the device, further process it offline (e.g. from your office) and finally
re-transfer it to the device.
You can either:
•
load an existing parameter file from a device (please refer to chapter [Loading device data when using
Smart view]).
•
create a new parameter file (see below),
•
open a locally saved parameter file (backup).
In order to create a new device/parameter file by way of a device template offline:
•
In order to create a new offline parameter file please choose within the »file-menu« »create new
parameter file«.
•
A working window pops up. Please make sure, that you select the right device type with the correct
version and configuration.
•
Finally click on »Apply«
•
In order to save the device configuration select »Save« out of the »File-Menu«.
•
Within the menu »Modify Device Configuration (Typecode)« you can modify the device configuration or
simply find out the type code of your current selection.
If you want to transfer the parameter file into a device, please refer to chapter “Restoring of device data when
using Smart view”.
Page 64 EN MRU4 10/09