Wohler AMP2-16V-M, Руководство пользователя

Страница: 85 / 172

Page 78
Figure 5–10: Automation Menu
Automation Menu
Help Cancel
Condition
Slot 1 3G SDI I/O = HD
Slot 1 3G SDI I/O = SD
Response
P3 HD Preset
P2 SD Preset
Select
Row
Select
Condition
Slot 1 3G SDI I/O (Pr 1) = Dolby
--
P4 5.1 Chan
--
--
--
--
--
--
--
--
--
--
--
--
--
Save / Exit
Auto
Mode On
Select
Response
This menu shows ten Condition/Response lines that you can individually enable
or disable. Each line automatically enables when either a Condition or a Response
is selected. Lines that do not have both a Condition and a Response are
automatically deleted when you exit the menu. The priority of each
Condition/Response is determined by its position in the list: The higher the
position, the higher the priority.
In operation, if more than one condition is met, the one higher in the list will rule.
The Response events are edge triggered, that is, they will only take effect when a
change occurs. You can therefore override any automated change at any time. And
your changes stay in effect until the current condition is removed and then met
again, or until another condition is met. As long as a high priority condition is met,
lower priority conditions are ignored.
Responses
can only take effect when the
Main Screen
is displayed. If a
Condition
is met when control is in the
Dolby Zoom Screen
or
Loudness
Screen
, the
Response
will be delayed until the
Main Screen
is once again
displayed. This will prevent a preset change from interrupting your analysis
in the
Dolby Zoom Screen
or a loudness measurement in the
Loudness
Screen
. Likewise, if a
Condition
is met when control is in any of the menu
screens, the
Response
will be delayed until all menus are exited to avoid any
unexpected changes.
Controls
1. Select Condition: Rotating this control selects from the set of possible
conditions:
a) Slot n SDI-3G In = (SD, HD, 3G)
b) Slot n SDI-3G In = Unlock
c) Slot n SDI-3G In Pair m = Dolby
d) Slot n SDI-3G In Pair m = No Dolby
e) Slot p AES In Pair m = Lock