Wohler AMP2-16V-M, Руководство пользователя

Страница: 111 / 172

Page 104
Option Configuration Menu
This menu allows you to determine exactly how you want the audio to come
through the internal speakers and whether you want to enable the Main Screen
solos/mutes for this source. It also provides a link to the Hardware Configuration
Menu.
Configuration Selection
Menu
Main Screen
Menu
Configure
Options Option
Configuration Menu
Figure 5–26: Option Configuration Menu
Option Configuration Menu
Save / Exit Help Cancel
Configure
Hardware
Enabled
Disabled
Multiple
One at a Time
Select
Cluster
Monitor
Mixer
Trims
Solo Mode
5.1
Downmix
Paramters
In Place
Left-Cntr-Right
Automation
Menu
1. Select Cluster: Rotating or pressing this control determines whether you
can select a single cluster, or multiple clusters to be heard at once.
2. Monitor Mixer Trims: Rotating or pressing this control determines whether
the eight pairs of Channel Trim controls on the Monitor Mixer
Configuration Menu will be enabled for adjustment. This setting does not
affect the SuperPair, which will always have its trim controls enabled.
3. Solo Mode: Rotating or pressing this knob determines whether the
individual channels soloed by the Select Cluster controls are heard in their
native position or in place on the left and right speakers. When the monitor
mix is fed to an Analog or AES output card (for use with surround speakers),
each soloed channel is then heard either in its native (Left, Right, Center, LE,
Left Surround, or Right Surround) position or in the front (Left, Right, and
Center) speakers.
4. Downmix Parameters: Pressing this button displays the 5.1 Downmix