Wohler AMP2-16V-M, Руководство пользователя

Страница: 50 / 172

Page 43
How Do I Adjust Mixer Levels from the Main Screen?
Any of the input channels can be mixed to any of the AES or analog outputs.
Although mix levels can be set in the output configuration menus of each output
card, hot keys can be used to allow you to adjust mix levels from the Main Screen.
The hot keys for mixer controls are set in one of the Hot Key Configuration Menu.
This can also be done for the monitor mixer:
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen Main Screen
Configuration Menu
Hot Key 1-8
Configuration Menu
or
Hot Key 9-16
Configuration Menu
Configure
Hot Keys
Figure 3–22: Hot Key Configuration Menu
Hot Key 9 - 16 Configuration Menu
Save / Exit Help Cancel
Off
1 2 3 4 5 6 7 8
Selectable
Dolby Zoom
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
AES Out (4) Trim
AES Mic Channe... 29
Recall Preset
Press for Stat/Meta
Status/Metadata
Off
Dolby
Zoom
Key 7
Trim
Key 1
Rec 1
Key 5
Stat
Mdata
Downmix
Dnmix
Key 8
SDI Feed from Den... 24
Status/Metadata/Preset
Data
Pre
Key 2
LtRt LoRo
Auto
Mode
Automation On-Off
1. Turn the control associated with the hot key you want the downmix to be on
so that the long bar (not the control label) is highlighted. Press the control
until the purple AES or Analog Output Trim function displays. If there are
multiple output cards, note that the card slot number is shown in parenthesis.
2. Turn the control to each of the 16 channels shown and press to either include
that channel in this control's adjustment or not. Although you can set the
control to adjust multiple channels, you cannot set two different controls to
adjust the same channel. If a channel is already controlled by another hot
key, its selection is shown in gray.