Page 79
f)
Slot p AES In Pair m = Unlock
g)
Slot p AES In Pair m = Dolby
h)
Slot p AES In Pair m = No Dolby
i)
Default
where:
a)
Slot n is between 1 and 3, limited by the number of SDI cards
installed,
b)
Slot p is between 1 and 5, limited by the number of AES Input cards
installed, and
c)
Channel Pair m is between 1 and 8.
2.
Select Row: Rotating this control selects the row that the Conditions and
Responses will be set on. When pressed, the currently selected row is
toggled between enabled and disabled.
a)
Auto Mode On/Off:
Pressing this control turns the action of the
Conditions and Responses on and off. While this is set to Off, the
individual on/off settings of each line are stored unchanged.
b)
Select Response: Rotating this control displays one of 32 presets that
can be recalled when the Select Condition is met.
Adding an Auto Mode Hot Key
By setting up an Auto Mode hot key, you can quickly and easily turn the
Automation Menu on or off. Refer to the Hot Key Configuration Menu 1 Through 8
section of this chapter to do this.
When one of the knobs is assigned as an Auto Mode hot key, the background color
of the knob label will be gold if Auto Mode is on and gray if Auto Mode is off.
Since it works in parallel with the Auto Mode on/off control in the Automation
Menu, each one will be affected by toggling the other one. It determines whether
the Condition/Response settings in the Automation Menu (if any) will be active
or not.
Note:
This hot key has no settings: simply setting it as an Automation Menu
(on/off) hot key is enough. Moreover, it is normally not necessary to set up more
than one Automation Menu hot key.
Содержание AMP2-16V-M
Страница 170: ...Page 163 Figure B 8 Deleting Stream Destinations...