Wohler AMP2-16V-M, Руководство пользователя

Страница: 100 / 172

Page 93
Pressing this knob selects the letter or symbol in the character field, and
places it in the next location in the Label field.
Loudness Clusters Menu
The Loudness Clusters Menu allows you to prevent the loudness measurement
from being displayed on one or more clusters. By default, all clusters are available
to be measured (even those with more than 8 channels). For example, if you want
to limit the loudness measurement to only the 5.1 Channel Cluster (#3) in the
figure below, you would disable all of the other clusters (1-2, 4-6) and set the
default cluster to #3. Then no other clusters could be chosen to be measured.
Loudness Measurement
Menu
Configuration Selection
Menu
Main Screen
Menu
Configure Main
Screen Main Screen
Configuration Menu
Configure
Loudness
Loudness Clusters Menu
Loudness
Clusters
Figure 5–20: Loudness Clusters Menu
Loudness Clusters Menu
Save / Exit Help Cancel
Default
Cluster
Cluster
1
2
3
4
5
6
7
8
Name
Pair 1
Pair 2
5.1 Channels
Pair 6
Pair 7
Pair 8
Measure
On/Off
Off
1. Measure On/Off: Rotating this knob moves the highlight from one cluster
to the next. Pressing this knob toggles whether this cluster can be chosen for
loudness measurement by a Select Cluster hot key or by the Select
Cluster control on the Loudness Screen.
2. Default Cluster: The default cluster is the cluster for which loudness is
measured on the Main Screen if no other enabled clusters are selected.