Wohler AMP2-16V-M, Руководство пользователя

Страница: 20 / 172

Page 13
are None, Dialnorm Only, Line Mode, or RF Mode.
11. Rotate the Metadata Scroll knob to scroll through the list of available
Dolby metadata items. The metadata items in the list are actively refreshed
by the software, and will change to reflect changes in the selected input
stream.
12. When you have completed making your selections on the Dolby Decoder
Configuration Menu, press Save/Exit to return to the Metadata Select
Menu.
Figure 1–14: Metadata Select Menu
Metadata Select Menu
Help Save / Exit Cancel
Line
Select
Metadata
Page 3
Text
Color
Font
Size
Metadata
Select
SMPTE 2020
Program Description
[Empty]
Dolby Digital Sample Rate
RF Compression Profile
Center/Surround Mix Lev
Stereo Downmix
LtRt Cntr/Srnd Downmix Level
LFE Lowpass Filter
Original Bitstream
Dialogue Level
Press to Configure
Metadata
Source
Note: Any text line can contain any metadata element.
15.Rotate the Line Select knob to scroll the highlight up or down among the
lines of text to select the line you want to modify.
16.Select the Text Color, Font Size, and the Metadata Select as you did
previously.
17.Repeat Steps 13 through 14 for Pages 2 and 3 as needed.
18.Press the Save/Exit button twice to return to the Configuration Selection
Menu.
5. Save Your Setup in a Preset
Now that you have a basic configuration for your system, you will need to save it as
a preset so you can reconfigure this way quickly and easily. Note that if you make
any change(s) in the menu settings and return to the Main Screen without saving
them into a preset, a yellow warning flag will appear on the Main Screen reminding
you to do so.
Refer to Figure 1-15 and perform the following steps.