Page 102
Figure 5–25: Monitor Mixer Configuration Menu
Monitor Mixer Configuration Menu
Save / Exit
Help
Cancel
Chan 1
Chan 2
Chan 3
Chan 4
Slot 2 SDI-3G In
Pair 4
Slot 2 SDI-3G In
Pair 5
+0
+0
+0
+0
Channel
Trim
Source
Pair
Select
Phase
LED
On/Off
Delay to Speakers = 170 mS
Audio
Delay
Dolby 5.1
Speaker
Mute:
Off
L Front
R Front
Center
LFE
Channel
Func
Mixer
Channel
Select
Set
Clusters
With the combination of the Volume control, channel clustering, and speaker
setting, you has a very powerful, intuitive tool to arrange the metering and
monitoring options on the Main Screen so users can tell at a glance what is
happening with the monitored sources.
1.
Set Cluster: Pressing this knob continues on to the Cluster Configuration
Screen, where you can configure and label the meter clusters, and how they
will display on the Main Screen.
2.
Mixer Channel Select: Rotating this knob moves the red selection boxes
from side to side, selecting the monitor mixer channel and pair to configure.
3.
Channel Func: Rotating this knob selects either L Front, R Front, Center,
LE, L Sur., R Sur., L Rear Sur., R Rear Sur., M Sur., or None.
1.
Channel Trim: Rotating this knob changes the gain. This knob has a range
of -60 dB to +12 dB (inclusive) in 1 dB steps. Pressing and holding this knob
for over 1 second returns the setting to 0 dB. You can mute the channel by
turning this knob counterclockwise beyond
2.
-60 dB.
3.
Audio Delay: Rotating this knob allows you to add an audio delay of up to
170 ms in 1 ms increments to the speaker audio. As you turn the knob, the
audio delay varies dynamically so that, while watching the associated video,
you can visually and audibly determine the correct delay. Pressing the knob
toggles between no delay (Off) and the current delay setting.
Note:
While adjusting the delay, the monitor may temporarily produce a small
Important
:
It is necessary to accurately set the Channel Function for
each channel because many other system functions depend
upon it. This includes Channel Clustering, Loudness
Measurement, output to a surround sound system, and output
to the internal speaker system.
Содержание AMP2-16V-M
Страница 170: ...Page 163 Figure B 8 Deleting Stream Destinations...