Wohler AMP2-16V-M, Руководство пользователя

Страница: 74 / 172

Page 67
3G SDI I/O Configuration Menu
This menu allows you to configure the audio from the 3G SDI I/O Card. Note that
the bulk of the functionality of this menu is identical to those of the AES/Analog
Output Configuration Menus, so this section will only discuss those functions
that are unique to this menu. For details on the Mixer Channel Select, Channel
Trim, Mix Input Select, Pan, and Output Assign functions, refer to Free Mix
Mode Controls in this chapter.
Configuration Selection
Menu
Main Screen
Menu
Audio
Processors
Audio Processor Card Menu
3G SDI I/O Card
Configuration
3G SDI I/O
Configuration Menu
Figure 5–2: 3G SDI I/O Configuration Menu - Re-Embed: Select
3G SDI I/O Slot 1 Configuration Menu
Save / Exit Help Cancel
Slot 3 (AES In)
Pair 1
Slot 1 (SDI In)
Pair 3
Output
Assign
Pan
+0 +0 +0 +0
Mix Input
Select
Chan. 1 Chan. 2 Chan. 3 Chan. 4
Mixer
Channel
Select
Channel
Trim
SDI Audio
Delay
80 mS
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
Re-Embed
Select
1. SDI Audio Delay: Pressing this knob turns the SDI input delay On or Off.
Rotating this knob selects the amount do delay. The SDI audio delay may be
set to either Off or from 3 ms to 160 ms in 1 ms increments. The system
will save the set delay value even when the system is turned off.
Note: The SDI Audio Delay you set also applies to the AES outputs on the
3G/HD/SD-SDI I/O card and these AES signals when used in the re-
embedded output.
2. Re-Embed: Pressing this encoder toggles between Pass Thru and Select.
a) Pass Thru will cause the 3G SDI card to pass its input channels
directly through to its reclocked output without any changes and
without any SDI Audio Delay.