Wohler AMP2-16V-M, Руководство пользователя

Страница: 118 / 172

Page 111
Figure 5–32: Unit Information Menu - Application
Unit Information Menu
Exit
Application: AMP2-16-V
Application Version: 7.32
NvRam Table Version: 00.69
Graphics Software Version: 04.19
Motherboard FPGA Version: 02.37
Motherboard DSP Version: 02.50
Front Panel Code: 848093 V. 1.3.1
PS 1: 3G IO Embed Board V03.66
PS 2: Empty
PS 3: Empty
PS 4: Empty
PS 5: Empty
Unit S/W
Info.
Ethernet
Serial
Info.
S/W
Update
Dolby Version: 2.1.2.9
Motherboard CPLD Version: 03.04
Display Type: LCD
1. Unit Name: Pressing this knob proceeds to the Label Menu where you can
name this particular AMP2-16V so that this name can be seen remotely when
updating software via the Ethernet.
2. Unit S/W Info.: Pressing this knob displays the version of each software
component in the unit and the I/O modules that this unit contains.
3. Ethernet Serial Info: Pressing this knob changes this menu to show the
Ethernet and serial port information as shown in
Figure 5–33 below.
Figure 5–33: Unit Information Menu - Ethernet
Unit Information Menu
Exit
Ethernet Port Configuration
IP Address: 0.0.0.0
MAC Address: 00:03:f4:02:97:55
Serial (RS-232) Port Configuration
Baud Rate: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
Handshaking: None
Unit S/W
Info.
Ethernet
Serial
Info.
S/W
Update
Network Mask: 0.0.0.0
Gateway: 0.0.0.0
DNS: 0.0.0.0
Unit Name: Edit Studio Mon 3
Ethernet
Setup
1. S/W Update: Do not use this knob unless instructed to do so by Wohler
technical support.