Wohler AMP2-16V-M, Руководство пользователя

Страница: 136 / 172

Page 129
Adding a Dolby D/E/DD+ Card
To add a Dolby D/E/DD+ Card, position the monitor with the rear panel facing you
and follow the instructions below.
1. Place the monitor on a solid, static-free surface and remove the power
cord(s).
2. Using a small Phillips screwdriver, remove the top cover.
Figure 6–12: Remove Bottom Screw
3. Pull the monitor so that it slightly hangs over the edge of the surface on
which it is sitting, and remove the screw on the bottom as shown in Figure 6–
12 above.
Figure 6–13: Remove Nuts and Washers
4. Using the adjustable wrench, remove the nuts and washers from the REF
connectors as shown in
Figure 6–11 above.