manualshive.com logo in svg

WinGD X92-B, Руководство по эксплуатации, Страница: 257 / 460

Поделиться
Скачать
WinGD X92-B Скачать руководство пользователя страница 257

PROCEDURE

1

If there is a clutch coupling between engine and propeller, do the steps that follow:

1.1

Engage the clutch coupling.

1.2

Keep the clutch coupling engaged during operation to prevent damage to the
engine.

2

Select the applicable control panel.

3

Start the auxiliary blowers.

4

Set the minimum fuel injection quantity on the related control panel to 30%.

5

Push the button START AHD or START AST to start the engine.

NOTE:

The ECS starts an automatic pre-lubrication sequence with a specified number
of pulses.

NOTE:

The ECS increases the engine speed.

6

If new cylinder liners or piston rings were installed, do a running-in, refer to section 

[section

not applicable for this engine]

.

7

If necessary, slowly adjust the fuel injection quantity.

NOTE:

The ECS changes the engine speed.

CLOSE UP

•

None

X92-B

AA00-0000-00AAA-131A-A

Operation Manual

Start the engine

Winterthur Gas & Diesel Ltd.

- 257 -

Issue 002  2021-11

Содержание X92-B













































































































































































































































































































































































































































































Отзывы:

Нет отзывов