WinGD X92-B Скачать руководство пользователя страница 295

Страница: 295 / 460

Stop the control system from the engine as follows:

10.1

Set to OFF all circuit breakers in the power supply box E85.

10.2

Set to OFF the engine control system (ECS) and the remote control system (RCS).

Do a check of the rail unit as follows:

11.1

Open the covers.

11.2

Make sure that there is no condensation or corrosion.

11.3

If you find condensation or corrosion, do the steps that follow:

11.3.1

Clean the related part.

11.3.2

Find the cause and repair the fault.

11.4

If necessary, apply anti-corrosion oil to give protection.

11.5

Close the covers.

Do a check of the supply unit as follows:

12.1

Make sure that there is no condensation or corrosion.

12.2

If you find condensation or corrosion, do the steps that follow:

12.2.1

Clean the related part.

12.2.2

Find the cause and repair the fault.

12.3

If necessary, apply anti-corrosion oil to give protection.

If the engine must have preservation for a long period, speak to or send a message to
WinGD for the applicable preservation procedures.

CLOSE UP

•

None

X92-B

AA00-0000-00AAA-151B-A

Operation Manual

Prepare the engine for standstill or for maintenance

Winterthur Gas & Diesel Ltd.

- 295 -

Issue 002 2021-11

Содержание X92-B













































































































































































































































































































































































































































































Результаты поиска

Содержание X92-B

Отзывы:

Похожие инструкции для X92-B

Бренды по названию

Популярные бренды

WinGD X92-B, Руководство по эксплуатации

Результаты поиска

Содержание X92-B

Отзывы:

Похожие инструкции для X92-B

Бренды по названию

Популярные бренды