background image

6.4.2

 Color display

The color display (009) of the LDU-20 shows different pages for each application. After boot-up,
or when you push the HOME button, the MAIN page is shown.

Some elements are shown on all pages as follows:

In the top right-hand corner, the system time is shown above the title bar.

Below the system time, Local or ECR is shown. If the LDU-20 is the active control location,
the indication In Control is shown.

The bottom of the color display has some space to show the function of the multi-function
buttons.

The color display has the general items that follow, refer to 

Figure 6-5

:

An orange arrow (001) shows the active item.

A 3D-rectangle (002) indicates a command button.

An orange frame (003) indicates the edit mode.

A black dotted frame (004) around an item shows the position of the cursor.

A white background (005) shows a parameter, which the operator can adjust.

A grey background (006) shows a parameter, which the operator cannot adjust.

Fig 6-5

 LDU-20 color display - general items

004

003

005

006

002

001

Legend

001

Orange arrow

004

Black dotted frame

002

3D-rectangle

005

White background

003

Orange frame

006

Grey background

For the procedures how to use the LDU-20, eg change a LDU-20 page, refer to section 

[section

not applicable for this engine]

.

X92-B

AA00-0000-00AAA-043H-A

Operation Manual

Local display unit (LDU-20) - general

Winterthur Gas & Diesel Ltd.

- 219 -

Issue 002  2021-11

Содержание X92-B













































































































































































































































































































































































































































































Отзывы: