Welch Allyn RetinaVue 100 Imager, Инструкция по применению

Страница: 26 / 116

Note
Use the radio buttons to select the 24-hour or 12-hour
format. The available wireless networks appear on the
Select
a Wi-Fi connection screen.
5. From the list of available networks, touch on the Wi-Fi connection that you want to
connect to.
Note *Wi-Fi network names shown here are examples.
Note If you don't see the desired Wi-Fi network that you want to
connect to, you may need to scroll down.
Note
During Wi-Fi communication, the RetinaVue 100 Imager
camera only supports the use of the following secure
authentication types: WPA2, WPA2-PSK, WPA2-Enterprise
(EAP-PEAP), and IEEE 802.11i. Open networks from public
access points are not supported. See the the
Device radio
section for further information. If you don't see the network
name in your list it might be a hidden network. Select "Other"
and enter the network name. See the
Troubleshooting
section for further information.
6. Using a secured network, enter your network Wi-Fi Username and Password or a
Passphrase and touch Connect .
a. (Optional). Touch Remember this connection and touch Connect to use the
selected network for subsequent Wi-Fi connections.
7. To continue setup, launch an internet browser from a computer and enter the
following address: https://www.retinavue.net/RN_CustomerPortal/.
8. On your RetinaVue 100 Imager camera, touch Next .
9. On the RetinaVue Network Customer Portal, enter your RetinaVue Network
Username and Password then click Log In.
22 Using the RetinaVue 100 Imager Welch Allyn RetinaVue™ 100 Imager