WEG MVW3000 Series, Руководство по программированию

Страница: 105 / 264

5
DETAILED PARAMETER DESCRIPTION
Description:
It expresses the percentage of the modulation index from which the motor field weakening occurs.
✓
NOTE!
This parameter is only visible on the HMI when: the control type is vector, P0202 = 3 (Sensorless
Vector) or P0202 = 4 (Vector with Encoder).
P0181 - Magnetization mode
Adjustable range: 0 to 1 Factory setting: 0
Acesso: Menu
→
Configurations
→
Control
Description:
It configures the magnetization mode of the machine to be driven.
Table 5.14: Magnetization mode
P0181 Function
0 General enable
1
Start/Stop
✓
NOTE!
This parameter can be changed only with the motor stopped.
P0200 - Password
Adjustable range: 0 to 1 Factory setting: 1
Acesso: Menu
→
Configurations
→
HMI
→
Password
Description:
With the factory settings the password is 5.
To change the password, set P0200 = 1 (active) and enter the new password.
When this parameter is set to Inactive, it allows changing the content of the parameters independently of
P0000.
When set to Active, it allows changing the contents of the parameters when P0000 is equal to the value of the
password.
Table 5.15: Password
P0200 Function
0 Inactive
1 Active
P0201 - Language selection
Adjustable range: 0 to 4 Factory setting: 0
Acesso: Menu
→
Configurations
→
HMI
→
Language
Description:
It defines the language of the Graphic HMI.
MVW3000 | 5-29