WAGO-I/O-SYSTEM 750
PROFINET 289
750-8215 PFC200; G2; 4ETH CAN USB
Manual
Version 1.2.0, valid from FW Version 03.02.02(14)
Tabelle 200:
“PROFINET I-Device” Tab
Parameters
Description
Position
Position of the individual PROFINET modules
Name
Displays the PROFINET module name
Each data point can be assigned a module name. If a
user-defined name is not assigned, the name is generated
from the data type and the number of elements. This is
automatically updated with changes. A default name is
also generated for deleted module names.
The data point of the I-device can be written (input).
The data point of the I-device can be read (output).
Variable
Name of the data point
The name is always identical to the name of the
application variable.
Mapping
Symbol which displays a new or existing variable.
The variable is not yet available, is newly created and
can then be used in the entire project.
An existing variable is used for mapping.
Data type
Displays the data type and according to the application
variable
The following data types are supported:
•
BYTE
•
WORD
•
DWORD
•
LWORD
•
SINT
•
INT
•
DINT
•
LINT
•
USINT
•
UINT
•
UDINT
•
ULINT
•
REAL
•
LREAL
•
ARRAY OF BYTE
•
ARRAY OF WORD
•
ARRAY OF DWORD
•
ARRAY OF LWORD
•
ARRAY OF SINT
•
ARRAY OF INT
•
ARRAY OF DINT
•
ARRAY OF LINT
•
ARRAY OF USINT
•
ARRAY OF UINT
•
ARRAY OF UDINT
•
ARRAY OF ULINT
•
ARRAY OF REAL
•
ARRAY OF LREAL
Length (array)
Displays the number of elements
Description
Input field for adding a description
Right-clicking inside the table opens the context menu for adding (
Add
), deleting
(
Delete
), arranging (
Up/Down
) or renaming (
Rename
) other modules. The
modules contain
other submodules (“Input”/“Output”) with data points.
