EUROBLOC
SERVICE MANUAL FOR HOIST
157/212
This document and the information contained herein, is the exclusive property of Verlinde S.A.S. and represents a non-public, confidential and proprietary trade secret that
may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S.
Copyright © (2013) Verlinde S.A.S. All rights reserved.
06/2015
Reassembly
WARNING
On assembly use thread-locking compound Weicon Lock AN302-43 or equal
for all screws.
1
2
Lubricate the thrust bearing (4) and the hook shaft. Install
the thrust bearing (4), locking rings (5), and cover plate (6).
Insert the hook (1) into the bearing house and reassemble
the thrust bearing (4). Ensure that the pressure plate of the
thrust bearing with the bigger inside diameter (D2) is at the
bottom and the one with smaller inside diameter (D1) is at
the top.
3
3
For frame size VT1, VT2
Guide the rope on the rope sheave (6). Reassemble the
rope sheave (6), sheave cover plates (5).
For frame size VT3
Guide the rope on the rope sheave (6). Reassemble the
rope sheave (6), sheave cover plates (5) and rope sheave
bearing set (7).
