vds 69871-01, Руководство по эксплуатации и техническому обслуживанию

Страница: 25 / 93

2-2 AU User Controls, Settings and Operation
2.2.1.1 Main Screen:
From the Main Screen level, you can select all functions of the AU operation.
NOTE: No functions can be performed until one projector or a combination of projectors is selected
in the system.
•
Complete ACON : use this command to perform a complete setup which includes automatic
Geometry and Convergence Correction.
•
Geometry Correction
: Performs just the automatic Geometric portion of the AU operation.
•
Convergence Correction
: Performs just the automatic Convergence portion of the AU
operation.
•
Recall Last Good
: Use this function to load the geometry and convergence projector settings,
prior to the last
AU
controlled action ( i.e., undo the last
AU
correction action).
•
Projector(s) selection window:
o Under the Proj column, select one or more projectors to perform the AU functions.
o Select a single projector by simply pointing to a particular projector ID and pressing the left
mouse button.
o Select a combination of projectors by pointing and selecting a projector ID while holding down
the control
<Ctrl> or <Shift> key
o Select all projectors by clicking on the Proj column header.
o Projector Status Indicators : Next to the projector ID number is a status indicator. The color of
the indicator will change based on the status of the projector.
-
Gray: Projector “off”
-
Green: Projector “on”
-
White: Projector is in “standby”
-
Yellow: Projector is under AU control
-
Red: Error/Alarm
•
AU Operation Status Panel: This section of the main window displays the AU operation status
indications.
2.2.2 Drop Down Menus
2.2.2.1
Files
menu:
Projector(s) Selection/Status Window
AU Operation Status Window