ProStar325 Service Manual
30
Publication date 8 May 2003
2.9.2
Inspection for transit damage
Transit damage can be obvious or concealed and in either case
will be admitted by the carrier only if it is reported within the
terms of the carrier’s agreement. For any claims against damage
in transit, the following general rules apply:
❑
Before accepting delivery, you must inspect the
packages for signs of obvious damage. The
nature of any obvious damage must be noted on
the carrier’s waybill, which then must be
countersigned by a representative of the carrier.
❑
Within the time limit stated in the terms and
conditions of carriage, a further inspection must
be made for concealed damage. If any damage is
found at this stage, the carrier must be notified
in writing. You must retain all packaging
material for subsequent inspection by a
representative of the carrier
.
❑
A copy of any damage report must be forwarded
to the Varian Sales Office dealing with the
supply of your equipment.
After accepting delivery, take the equipment to the installation
site, then unpack and check the contents. Varian detectors are
inherently robust, and the packaging is designed to prevent
internal damage. However, the contents form part of a precision
measuring system and all packages should be handled with care.
In transit, sharp jolts must be avoided and the packages should
not be inverted or tilted unnecessarily.
Markings on the shipping cartons generally indicate which side of
the package should be kept on top. In-house transit routes must
be carefully considered. Vertical, horizontal and turning
clearances should be calculated from the shipping carton
dimensions of the detector.
Unpacking of the equipment is your responsibility and
instructions are provided with the detector. As the packages are
opened, the contents should be checked against the enclosed
packing lists and any differences from the original order should
be referred immediately to your Varian Sales Office. All contents
of the shipping packages should be assembled together when
installation is to be carried out by Varian Service personnel. Do
not discard any packaging components or filler materials.
2.10
Computer interface
2.10.1
Computer requirements
The minimum configuration represents the absolute minimum
you can run the software on. This PC configuration may be out of
StockCheck.com
Содержание ProStar 325 UV-Vis
