50 Rainger Linear
OPERATION
Side Inlet
Hose and Cord Positioning
The following instructions describe a basic method of
positioning which includes how to position the hose and
optional electric cord for the side inlet depending on
direction of machine movement, position of machine in
relationship to the pipeline and power pedestals as the
machine moves across the field.
1. Connect the first hose to the pipeline shut off
valve and linear cart side inlet, then latch in
place. See Figure 50-1.
2. Set the end of field/hose stop post for the length
of the hose being used.
3. If using the optional electric cord drag:
(a) Make sure the power pedestal disconnect is
in the OFF position.
(b) Position the electric cord far enough away
from the hose, so that the hose will not drag
over it. To prevent interference between the
electric cord, cart tires and hose, bury the
electric cord in the area where interference
will occur or when applicable, position the
electric cord over the top of hose. See Figure
50-1.
(c) Connect the electric cord to the power ped-
estal.
(d) When ready, switch the power pedestal dis-
connect switch into the ON position.
4. At the machine/control panel:
(a) Set the direction of travel.
(b) Set the percentage timer to the desired ap-
plication rate or speed.
(c) If applicable set the Auto Reverse/Auto Stop
control as desired.
5. When ready, start the machine. If applicable,
start pipeline pump and open the water shut off
valve for the hose. The machine should start and
run in the desired direction and auto reverse or
stop at the end of field/hose stop post which was
set for the length of the hose.
(a) As the cart moves, the side inlet begins to
pivot. See Figure 50-2.
(b) As the side inlet pivots the hose is pushed
out away from the cart and guided by either
the side walls of the cart tires or the optional
hose bumpers. See Figure 50-3.
(c) After the side inlet has pivoted completely
the hose is being pulled by the side inlet
and guided by either the side walls of the
cart tires or the optional hose bumpers. See
Figure 50-4.
Riser
Guidance (Furrow or Cable)
Poly
14’
[4.27m]
(4”)
20’
[6.10m]
(6”)
16’
[4.88m]
(4-3/4”)
with Bumpers
Riser
Guidance (Furrow or Cable)
14’
[4.27m]
(4”)
20’
[6.10m]
(6”)
32’
[9.75m]
(8”)
16’
[4.88m]
(4-3/4”)
without Bumpers
centerline of Cart path
EOF to 1st riser =
poly length - 50 ft.
Intermediate riser spacing =
(2x poly length) - 80 ft.
Intermediate
Riser
Figure
2
5
1
3
4
4
7
6
8
9
10
Figure 50-1 1. First Hose
2. Shut Off Valve
3. Side Inlet
4. Hose Bumper
5. Electric Cord
6. Buried Electric Cord
7. Power Pedestal
8. Alternate Power Pedestal
Location
9. Smooth Hard Surface
10. Direction of Travel
Riser
Guidance (Furrow or Cable)
Poly
14’
[4.27m]
(4”)
20’
[6.10m]
(6”)
16’
[4.88m]
(4-3/4”)
with Bumpers
Riser
Guidance (Furrow or Cable)
14’
[4.27m]
(4”)
20’
[6.10m]
(6”)
32’
[9.75m]
(8”)
16’
[4.88m]
(4-3/4”)
without Bumpers
centerline of Cart path
EOF to 1st riser =
poly length - 50 ft.
Intermediate riser spacing =
(2x poly length) - 80 ft.
Intermediate
Riser
Figure
1
Figure 50-2 1. Direction of Travel
Riser
Guidance (Furrow or Cable)
Poly
14’
[4.27m]
(4”)
20’
[6.10m]
(6”)
16’
[4.88m]
(4-3/4”)
with Bumpers
Riser
Guidance (Furrow or Cable)
14’
[4.27m]
(4”)
20’
[6.10m]
(6”)
32’
[9.75m]
(8”)
16’
[4.88m]
(4-3/4”)
without Bumpers
centerline of Cart path
EOF to 1st riser =
poly length - 50 ft.
Intermediate riser spacing =
(2x poly length) - 80 ft.
Intermediate
Riser
Figure
1
Figure 50-3 1. Direction of Travel
Riser
Guidance (Furrow or Cable)
Poly
14’
[4.27m]
(4”)
20’
[6.10m]
(6”)
16’
[4.88m]
(4-3/4”)
with Bumpers
Riser
Guidance (Furrow or Cable)
14’
[4.27m]
(4”)
20’
[6.10m]
(6”)
32’
[9.75m]
(8”)
16’
[4.88m]
(4-3/4”)
without Bumpers
centerline of Cart path
EOF to 1st riser =
poly length - 50 ft.
Intermediate riser spacing =
(2x poly length) - 80 ft.
Intermediate
Riser
Figure
1
Figure 50-4 1. Direction of Travel
Содержание Rainger Linear
Страница 2: ...2 Rainger Linear This page was left blank intentionally...
Страница 6: ...6 Rainger Linear TABLE OF CONTENTS This page was left blank intentionally...
Страница 36: ...36 Rainger Linear OPERATION This page was left blank intentionally...
Страница 58: ...58 Rainger Linear OPERATION This page was left blank intentionally...