Vacon NX ACTIVE FRONT END II Скачать руководство пользователя | Manualshive

Страница: 76 / 94

background image

76

• Vacon

arfiff05 Standard AFE-II

Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/

B03: FALSE = No Fault, TRUE = Fault Present
No Fault: Drive is not on fault state.
Fault Present: Drive is in fault state.

B04: FALSE = Coast Stop Activated, TRUE = Coast Stop Not Activated
Coast  Stop  Activated:  DI:  Run  Enable  False,  Quick  Stop  Active,  MCB  Status  Open, MCB Control
Open, Enable MCB Close, MCB Forced Open.
Coast Stop Not Activated: Running Enabled

B05: FALSE = Quick Stop Activated, TRUE = Quick Stop Not Activated
Quick Stop Activated:  Quick Stop command is active.
Quick Stop Not Activated: Quick stop command is not active.

B06: FALSE = MCB Control OK, TRUE = MCB Control Not OK
MCB Control OK: MCB Control and Drive internal status are the same.
MCB  Control  Not OK: Drive internal status to close the  MCB is high but application logic request
MCB open. This can be case when MCB has been opened but DC is connected to battery system. DC
needs to be discharged or MCB is needed to close.

B07: FALSE = No Warning, TRUE = Warning Present
No Warning: There is no warning or the warning has disappeared again.
Warning Present: Drive still works; warning in the service/maintenance parameter;
no acknowledgement.

B08: FALSE = DC Voltage out of tolerance TRUE = DC Voltage within tolerance
DC Error Out Of Tolerance Range:
DC Error Within Tolerance Range:

B09: FALSE = No Control Requested, TRUE = Control Requested
No Control Requested: Control by the automation system is not possible.
Control Requested: The automation system is controlling.

B10: FALSE = DC Not Reached, TRUE = DC Reached Or Exceeded
DC Not Reached: DC Voltage is below P2.5.5.1 level
DC Reached Or Exceeded: DC Voltage is above the P2.5.5.1 level

B11: MCB Control (DO Final)
FALSE: Drive is controlling MCB to be Open.
TRUE: Drive is controlling MCB to be Closed

B12: MCB Feedback
FALSE:

Feedback indicates MCB to be Open

TRUE:

Feedback indicates MCB to be Closed

B14: FALSE = Charge DO Open, TRUE = Charge DO Closed
Charge DO Open: Charging Command not active
Charge DO Closed: Charging Command Active

B15: FALSE = FB DW Feedback Low, TRUE = FB DW Feedback High
FB DW Feedback: FB Control Word B11 is echoed back to the Fieldbus. Can be used to monitor
communication status from the drive.

«
...
74
75
76
77
78
...
»

Содержание NX ACTIVE FRONT END II































































































Отзывы:

Нет отзывов

Похожие инструкции для NX ACTIVE FRONT END II

Бренд: CAME Страницы: 98

Бренд: CAME Страницы: 16

Бренд: CAME Страницы: 8

Бренд: Samson Страницы: 48

FSDrive-MV1000 Series

Бренд: YASKAWA Страницы: 260

Бренд: YASKAWA Страницы: 114

Бренд: YASKAWA Страницы: 20

Бренд: YASKAWA Страницы: 152

Бренд: YASKAWA Страницы: 66

Бренд: YASKAWA Страницы: 20

Бренд: YASKAWA Страницы: 17

Бренд: YASKAWA Страницы: 58

J1000 CIMR-JC series

Бренд: YASKAWA Страницы: 2

Бренд: YASKAWA Страницы: 58

DuetPro Carrycot

Бренд: Qtus Страницы: 52

MT600iWP Series

Бренд: weintek Страницы: 2

Бренд: Aulisa Страницы: 32

J1000 CIMR-JC series

Бренд: YASKAWA Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды