User interfaces
vacon • 53
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
3. Then enter the ID number of parameter or monitoring value you wish to access. Press OK but-
ton to confirm.
4. Requested Parameter/Monitoring value appears on the display (in editing/monitoring mode.)
Copying parameters
NOTE:
This feature is available in graphical keypad only.
The parameter copy function can be used to copy parameters from one drive to another.
The parameters are first saved to the keypad, then the keypad is detached and connected to another
drive. Finally the parameters are downloaded to the new drive restoring them from the keypad.
Before any parameters can successfully be copied from the keypad to the drive, the drive
has to be
stopped
before the parameters are uploaded.
•
First go into
User settings
menu and locate the
Parameter backup
submenu. In the
Param-
eter backup
submenu, there are three possible functions to be selected:
•
Restore factory defaults
will re-establish the parameter settings originally made at the fac-
tory.
•
By selecting
Save to keypad
you can copy all parameters to the keypad.
•
Restore from keypad
will copy all parameters from keypad to a drive.
Figure 20. Parameter copy
NOTE:
If the keypad is changed between drives of different sizes, the copied values of these param-
eters will not be used:
Motor nominal current (P3.1.1.4)
Motor nominal voltage (P3.1.1.1)
Motor nominal speed (P3.1.1.3)
Motor nominal power (P3.1.1.6)
Motor nominal frequency (P3.1.1.2)
Motor cos phi (P3.1.1.5)
Switching frequency (P3.1.2.3)
Motor current limit (P3.1.3.1)
Stall current limit (P3.9.3.2)
Stall time limit (P3.9.3.3)
Stall frequency (P3.9.3.4)
Maximum frequency (P3.3.1.2)
Help texts
The graphical keypad features instant help and information displays for various items.
All parameters offer an instant help display. Select Help and press the OK button.
Text information is also available for faults, alarms and the startup wizard.
STOP
READY
Keypad
Main Menu
Favourites
( 0 )
( 4 )
ID:
M6
User settings
I/O and Hardware
( 8 )
STOP
READY
Keypad
Drive name
( 3 )
ID:
User settings
Application selection
HVAC
M6.5
M6.5
Parameter backup
Drive
STOP
READY
Keypad
Restore from keypad
ID:
Restore factory defaults
M6.5
M6.5.1
Save to keypad
Parameter backup
OK
OK
9
164.
em
f