User interfaces
vacon • 57
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
Changing control places
Change of control place from
Remote
to
Local
(keypad).
1.
Anywhere in the menu structure, push the FUNCT button.
2.
Using the arrow buttons, select Local/Remote and confirm with the OK button.
3.
On the next display, select Local or Remote and again confirm with the OK button.
4.
The display will return to the same location as it was when the
FUNCT
button was pushed.
However, if the Remote control place was changed to Local (Keypad) you will be prompted for
keypad reference.
Figure 24. Changing control places
Accessing the control page
The
Control page
is meant for easy operation and monitoring of the most essential values.
1. Anywhere in the menu structure, push the
FUNCT
button.
2. Push the
Arrow up
or the
Arrow down
button to select
Control page
and confirm with the
OK
button.
3. The control page appears
If keypad control place and keypad reference are selected to be used you can set the
after having pressed the
OK
button. If other control places or reference values are
used the display will show Frequency reference which is not editable.
Figure 25. Accessing Control page
Changing direction
Rotation direction of the motor can quickly be changed by applying the FUNCT button.
NOTE!
Chang-
ing direction
command is not visible in the menu unless the selected control place is
Local
.
1. Anywhere in the menu structure, push the Funct button.
2. Push the Arrow up or the Arrow down button to select Change direction and confirm with the OK
button.
3. Then choose the direction you wish to run the motor to. The actual rotation direction is blinking.
Confirm with the OK button.
4. The rotation direction changes immediately and the arrow indication in the status field changes.
FUNCT
OK
OK
9169.emf
9170.emf
FUNCT
OK
OK
