Unipulse F805AT-BC, Руководство по эксплуатации

Страница: 79 / 202

6.SETTING AND ADJUSTMENT OF READING
64
6-4-10. Feed ratio over
Over scale alarm “OFL5” is activated when the feed ratio becomes greater than FEED
RATIO OVER set value. Comparison is disabled if the value is set to 999.99. Also, the
comparison is disabled if [FEED RATIO OVER ASC.] is set to zero second.
Operation
6-5. Graph Setting
6-5-1. Bar graph screen
6-5-2. Belt speed end point
Use this item to specify the full-scale value for belt speed bar graph.
Operation
Range: 0 – 999.99 % (5 digits, decimal place fixed)
MODE COMPARISON → → FEED RATIO OVER PAGE →
Goes to
Mode selection
screen
Specifies end points for bar graphs
Goes to waveform display
Graph select key
End point setting
Bar graph Bar graph end point
Bar graph area
Goes to comparison screen
Screen select key
MODE GRAPH SETTING
→ →
BELT SPPED END POINT
Range: 0.01 – 999.99 m/min (5 digits, decimal place fixed)