Unipulse F805AT-BC, Руководство по эксплуатации

Страница: 86 / 202

6.SETTING AND ADJUSTMENT OF READING
71
6-5-11. Graphic mode
Use this menu item to select a graph drawing mode.
Single: Triggered by key or control signal (GRAPH DRAW,
pin 34), a graph is drawn once to the X-axis end point.
Continuous: Triggered by key or control signal (GRAPH DRAW,
pin 34), graphs are drawn repeatedly until is
pressed or the control signal resets.
Level
( )
+Ext: Level detection is started by pressing or control
signal. One-time drawing to the X-axis end point starts when the
reading exceeds the threshold defined by [TRIGGER LEVEL].
Level
( )
+Ext: Level detection is started by pressing or control
signal. One-time drawing to the X-axis end point starts when the
reading exceeds the threshold defined by [TRIGGER LEVEL].
Level
( )
One-time drawing to the X-axis end point starts when the
reading exceeds the threshold defined by [TRIGGER LEVEL].
Level
( )
One-time drawing to the X-axis end point starts when the
reading traverses the threshold defined by [TRIGGER LEVEL].
Operation
6-5-12. Trigger level
Use this menu item to define the trigger level when LEVEL is selected in [GRAPHIC
MODE].
Operation
START
START
STOP
START
START
MODE GRAPH SETTING → → PAGE
Options: SINGLE, CONTINUOUS, LEVEL ( )+EXT
LEVEL ( )+EXT, LEVEL ( ), LEVEL ( )
→ GRAPHIC MODE
Range: 0 – 99999 (5 digits, decimal place floating)
MODE GRAPH SETTING → → PAGE → TRIGGER LEVEL