Unipulse F805AT-BC, Руководство по эксплуатации

Страница: 159 / 202

9.OPTION (Option card required)
144
9-3-10. Current input select
Operation
・
Password is required to enter the register screen
・ Selection
Select the target channel by pressing either
or .
Press
/
to select current/voltage input. Once you start the
modification procedures, a “Registration start” message appears in the screen: DO
NOT turn off the system while this message is displayed. Wait until “Registration end”
message appears.
* After modification is successfully registered, turn off the F805AT-BC and turn on
again to return to the normal screen.
9-3-11. AI input channel
This menu item specifies an AI channel that will be configured using [AI ZERO SET],
[AI FULL SCALE SET], and [AI DIGITAL FILTER] parameters.
* Analog inputs can be configured for each channel (ch1, ch2) independently.
Select a correct channel before modifying parameters.
Operation
MODE PASS WORD
→
SYSTEM
1269
→
OK
→
→
4321
→
OK
→
→
PASS WORD
→
PAGE
Selected channel
Adjusting parameter
Message
(user input)
ch1 ch2
CURRENT VOLTAGE
Input selection for each channel may require modification of hardware
settings: please contact UNIPULSE for technical assistance.
Note:
MODE OPTION
→
Options: ch1, ch2
PAGE
→
AI INPUT CHANNEL
→
PAGE →