u-blox ZED-F9P Interface Description - Manual
Advance Information
5.9.15 UBX-CFG-NMEA (0x06 0x17)
5.9.15.1 Extended NMEA protocol configuration V1
Message
UBX-CFG-NMEA
Description
Extended NMEA protocol configuration V1
Firmware
Supported on:
•
u-blox 9 with protocol version 27
Type
Get/Set
Comment
This message is deprecated in protocol versions greater than 23.01. Use
,
instead.
Set/Get the
detailed description of the configuration effects on NMEA output.
See the
Legacy UBX Message Fields Reference
for the corresponding configuration item.
Header
Class
ID
Length (Bytes)
Payload
Checksum
Message Structure
0xB5 0x62
0x06 0x17 20
see below
CK_A CK_B
Payload Contents:
Byte Offset
Number
Format
Scaling
Name
Unit
Description
0
X1
-
filter
-
filter flags (see
1
U1
-
nmeaVersion
-
0x41: NMEA version 4.1
0x40: NMEA version 4.0
0x23: NMEA version 2.3
0x21: NMEA version 2.1
2
U1
-
numSV
-
Maximum Number of SVs to report per TalkerId.
0: unlimited
8: 8 SVs
12: 12 SVs
16: 16 SVs
3
X1
-
flags
-
flags (see
)
4
X4
-
gnssToFilter
-
Filters out satellites based on their GNSS. If a
bitfield is enabled, the corresponding satellites
will be not output. (see
8
U1
-
svNumbering
-
Configures the display of satellites that do not
have an NMEA-defined value.
Note: this does not apply to satellites with an
unknown ID.
0: Strict - Satellites are not output
1: Extended - Use proprietary numbering (see
)
UBX-18010854 - R04
Advance Information
Page 59 of 259