Tyco Security Products SG-System 5, Руководство по эксплуатации

Страница: 15 / 108

3.0 Receiver Setup and Operation
- 15 -
3.1 SG-System 5 Quick Install Guide
FIGURE 3-1: SG-System 5 Connections (Back)
12
10
1
4
2
3
5
9
6
11
8 7
1. Primary SG-CPM5 Ethernet Connection
2. Primary SG-CPM5 Automation and Printer Port
3. Primary SG-CPM5 I/O Terminal connections
4. Primary SG-PSU5 AC Power Connection
5. Primary SG-CPM5 Display Connection
6. Line Card Ethernet Connections
7. Line Card USB Connections
8. Secondary SG-CPM5 Display Connection
9. Secondary SG-CPM5 I/O Terminal connections
10. Secondary SG-CPM5 Automation and Printer Port
11. Secondary SG-CPM5 Ethernet Connection
12. Secondary SG-PSU5 AC Power Connection
NOTE: This equipment shall be operated by SERVICE PERSONS only within RESTRICTED ACCESS LOCATIONS; refer to this
Operating Manual for all the Safety Instructions.
NOTE: For equipment used at signal receiving centers and intended to facilitate IP communication (hubs, routers, NID, DSL/cable
modems) 24hr backup power is required.
NOTE: To test the operation of LED indicators and LCD:
From the LCD, click the menu at the top right>> login/options>>More Options>> Visual indicator test>>yes.
NOTE: When using private, corporate, and high-speed data networks, network access and domain access policies are set to restrict unau-
thorized network access and ‘spoofing’ or ‘denial of service’ attacks. Select an ISP that provides redundant servers/systems,
backup power, routers with firewalls enabled and methods to identify and protect against these types of attacks (‘e.g., ‘spoofing’,
'DoS').
NOTE: Install external devices connected to SG-CPM5 Ethernet, SG-CPM5 automation printer ports and SG-CPM5 I/O terminal con-
nections in the same room as the SG-System 5. Maintain 6.5mm (1/4”) of separation between power limited and non-power limited
circuits. Use power limited, supervised circuits only.
S
G
-S
ys
te
m
5
O
pe
ra
ti
ng
M
anua
l