Twister T-ZERO, Руководство по техническому обслуживанию и уходу

Страница: 6 / 81

5
Performance based provisions and NFPA 654 and 101 Life Safety Objectives related to
dust collector deflagrations and explosions. According to NFPA 69 Chapter 15, this
equipment must be maintained per the manufacturer’s recommendations. Substituting
filters other than original OEM filters would violate the NFPA standards and void the
performance-based certification of this filter system. This system is a passive isolation
device which meets all of the aforementioned criteria. To sustain this certification the
owner is required to maintain this equipment per the manufacturer’s recommendations and
document periodic inspections as required in chapter 15 of NFPA 69 Standard on
Explosion Prevention Systems.
EQUIPMENT SHOULD BE PROPERLY ANCHORED TO THE GROUND WITH A
SUITABLY SIZED CONCRETE ANCHOR AND ADHERE TO LOCAL CODES AND
REGULATIONS.
BEFORE CLEANING THE T-ZERO
MAKE SURE YOU WEAR PERSONAL PROTECTIVE EQUIPMENT.
•
Read this Maintenance and Cleaning Manual to familiarize yourself with the T-
ZERO’s maintenance and cleaning procedures.
•
Lock out the power before performing maintenance or cleaning. Inspect the T-
ZERO for damage or any loose parts.
WHILE CLEANING THE T-ZERO
•
Make sure you wear proper personal protective equipment.
•
Stay clear of pinch-points that could cause injury to personnel, damage to other
equipment, or the T-ZERO.
•
Watch for pinch and cutting hazards around the tumbler, sub-lid, lid and blades.
•
If using a steam cleaner, operators must wear a respirator suitable for filtering
organics.