Twister T-ZERO, Руководство по техническому обслуживанию и уходу

Страница: 18 / 81

17
Note: Increase the time if product remains in the tumbler after the empty sequence is
complete. Decrease the time if the tumbler is empty while the tumbler motor is still on.
NOTE: IF THE TUMBLER IS DIRTY, SOME PRODUCT MAY STAY IN THE
MACHINE INDEFINITELY. DO NOT PUT YOUR HANDS INSIDE THE TUMBLER!
TO COMPLETELY EMPTY THE TUMBLER, REMOVE THE TUMBLER FROM THE
MACHINE OR LOCK OUT THE MACHINE POWER BEFORE REMOVING ANY
REMAINING PRODUCT.
Motor Status
The Motor Status shows whether the motors are on or off. When motors are on, the status
will read
STANDBY .
•
The STANDBY button will turn the motors off when pressed. After being
pressed, the STANDBY button will read OFFLINE , and the
corresponding motor will disappear from the Advanced Mode screen.
Motor Presets
The readings in line to the right with Setpoints show the set speeds of the motors. To
modify the set speeds tap the desired box and type a new value. Pressing the High,
Medium, and Low buttons in Advanced Mode will change the motor speeds to what is
shown in the corresponding boxes here.
Vacuum Off Timer
The Vacuum feature runs the HEPA Filter Stack after the blades have stopped to clear any
debris out of the ducting. The Vacuum Off Timer shows how long the HEPA Filter Stack
will run for after pressing the STOP button. The default run time is four seconds (please
read Important Safety Information on following page).