Twister T-ZERO, Руководство по техническому обслуживанию и уходу

Страница: 15 / 81

14
§ The setpoints in the image at the bottom of page 13
would spray water for 1.5 seconds every 6 seconds.
Advanced Mode
This button returns the operator to the Advanced Mode screen.
Super User Mode
Super User Mode unlocks additional buttons in Advanced Mode (as
shown in the image to the right) with various functions.
•
The Hold to SPRAY button turns on the water
sprayers momentarily.
•
The SysInfo button will take you directly to the
System Information Screen from where you can
troubleshoot motor errors quickly.
•
The Blades REVERSE button reverses the
direction of the blade motor. This is used for
sharpening new blades. Contact Technical
Support for more information (see technical support details at back of
manual).
Automatic Reset
The Auto Drive Error Acknowledgement button resets the motor drive. This feature will
not solve all motor errors. To remove other errors hold both the EMPTY and STOP buttons
for 3 seconds (see Troubleshooting on page 66 if errors do not clear).
Turn on this feature to automatically reset the motor drives.
Tilt Settings
The Tilt Control slide bar removes the ability to adjust the machine tilt in Advanced Mode.
•
The Calibration button resets the angle reading to 0 (see Recalibrating
the Tilt Sensoron page 62 for calibration procedure).
+/- Button Interval
The boxes in line to the right with +/- Interval show the increments the setpoints are
changed when +/- buttons are tapped in Advanced Mode. To adjust increments, tap the
boxes and type a new value. The default settings for the incremental changes are: