Tsino Dynatron CoolDrive Series, Руководство пользователя

Страница: 3 / 285

Safety Instructions
2

The following precautions must be followed to ensure safety

Overall Precautions
Danger

For your safe use of the product, carefully read this manual.

Keep this manual in a safe place and ensure that it is delivered to the end user.

Do not remove the cover, cables, connectors, and optional devices while the servo drive is powered on.
Failure to do so may result in electric shock, product shutdown, or burnout.
Warning

Use the power supply specifications (phase number, voltage, frequency, AC / DC) that are compatible with
the product.
Failure to do so may cause electric shock, product shutdown, or burnout.

Be sure to connect the ground terminal of the servo drive and servo motor to the ground electrode.
Failure to do so may cause electric shock or fire.

Do not disassemble, repair or modify the product.
Failure to do so may result in fire or malfunction.
Products that have been disassembled, repaired or modified are not covered by the warranty.
Note

The heat sink, regenerative resistor, external dynamic braking resistor, servo motor, etc. of the servo drive
may be at a high temperature when the power is on or when the power is just cut off. Take safety measures
such as mounting cover to avoid accidental contact between hands and components (cables, etc.).
Failure to do so may result in scald.

Do not damage or forcefully drag the cable do not cause excessive force on the cable; do not hang heavy
objects on the cable; do not let the cables be caught in the lid, cabinet door, etc.
Failure to do so may result in malfunction, damage, and electric shock.

The use of systems designed with safety functions must be performed by a technician familiar with the
relevant safety standards after understanding the contents of this manual.
Failure to do so may result in personal injury, product damages or other mechanical damages.

Do not use the product in locations exposed to water splashes, corrosion, flammable gases, or in the vicinity
of combustibles.
Failure to do so may cause electric shock or fire.

Do not use a servo drive that is damaged or with missing parts.

Set the emergency stop loop externally to ensure that the power is cut off and the operation is stopped
immediately in the event of an exception.

When used under poor power supply conditions, install protective devices to ensure that the input power is
supplied within the specified voltage fluctuation range.
Otherwise it will cause damages to the servo drive.