TruVision NVR 22 Series, Руководство пользователя

Страница: 69 / 201

Chapter 10: Camera setup
TruVision NVR 22 (SP) User Manual 65
To manually add an IP camera on the LAN network:
1. From the menu toolbar, click Camera Setup > IP Camera Status .
2. Click Manual Add . In the pop-up window, enter the camera details such as the IP
camera address/domain, protocol, management port, user name and password.
Click
OK .
The camera is added to the end of the list of devices.
Note : Only one camera can be manually added at a time.
◆
PoE ports:
You do not need to search for IP cameras connected to PoE ports as they are
automatically recognized when plugged in. However, they are only recognized if their
password is the same as that of the recorder or is 1234. If their password is different,
follow the instructions below to add the IP camera.
While the cameras are connected to the PoE ports, the camera password for cameras
added to the PoE ports is automatically synchronized when the admin password is
changed.
To add an IP camera with a different password or which is not 1234 to the recorder:
1.
Connect the IP camera to a network and set the camera’s IP address to
192.168.254.x (where “x” is between 1 and 254).
Note
: The camera’s IP address must be in the same subnet as the internal NIC IPv4
address of the recorder (under Network Settings
). The recorder’s default NIC IPv4
address is 192.168.254.1. However, you can use another IP address, if desired.
2. Plug the IP camera into the PoE port of the recorder.
The Plug and Play function cannot detect the camera as the passwords are
different. It cannot detect the IP address given to the camera.
3. From the menu toolbar, click Camera Setup > IP Camera Status .
4. Select the IP camera and click Edit . Change it from Plug and Play to Manual .
5. Change the IP address to the address set up in step 1 and enter the password for
the camera.
6. Save the settings. The camera will be recognized and come online.
Using RTSP custom protocols
Many IP cameras can stream video using RTSP. The recorder allows you to define
RTSP custom protocols per camera type and to add cameras to the recorder via RTSP.
To configure RTSP custom protocols:
1. From the menu toolbar, click Camera Setup > IP Camera Status .