TruVision NVR 22 Series, Руководство пользователя

Страница: 162 / 201

Chapter 18: Using the web browser
158 TruVision NVR 22 (SP) User Manual
5. Clear the
“Require server verification (https:) for all sites in this zone” box.
6.
Enter the IP address or DDNS name in the “Add this website to the zone” field.
7. Click Add , and then click Close .
8. Click OK in the Internet Options dialog box.
9. Connect to the recorder for full browser functionality.
Access the web browser
To access the recorder, open the Microsoft Internet Explorer web browser, and enter
the IP address assigned to the recorder, as a web address. On the logon window, enter
the user ID and password.
The default values for recorder network settings are:
• IP address - 192.168.1.82
• Subnet mask - 255.255.255.0
• Gateway address - 192.168.1.1
• Server port: 8000
• Ports:
When using the browser:
RTSP port: 554
HTTP port: 80
When using Chrome, Safari or Firefox,
port in HTTP mode: 7681
When using TruNav:
RTSP port: 554
Server/Client software port: 8000
For more information on port forwarding, see Appendix B
“Port forwarding information”
on page 190.
Configure the recorder via the browser
Click Configuration on the menu toolbar to display the configuration window. There
are two ways to configure the recorder: Browser and Remote.
Note : You must run Microsoft Internet Explorer as administrator.
Browser configuration
Browser configuration lets you define communication and network parameters such as
protocol type, maximum file size, stream type and network transmission settings. You
can also specify the directory locations for saving recorded and playback video,
captured images, and downloaded files.
The browser interface settings are saved on your PC, not on the recorder.
See Figure 33 on page 159 for information on browser configuration settings.