TruVision NVR 22 Series, Руководство пользователя

Страница: 81 / 201

Chapter 10: Camera setup
TruVision NVR 22 (SP) User Manual 77
9. Select the PTZ control actions to link to the VCA event.
In the Actions window, click the PTZ Linking tab. Select the PTZ camera and enter
the preset, preset tour, and/or a shadow tour to be triggered when the alarm is
detected. Click
Apply to save the settings.
10. When the VCA setup is completed, click OK to return to the VCA window.
11. Click Save to save all the settings and then click Exit to return to live view.
PTZ presets and tours
Presets are previously defined locations of a PTZ dome camera. It allows you to quickly
move the PTZ dome camera to a desired position. They are configured and modified
from the Camera Setup > PTZ Presets/Tours window (see Figure 23 below).
Tours are series of presets. Shadow tours allow you to record the manual movement of
a PTZ and follow the same tour at a later date.
Note: The PTZ dome camera used must be able to support a preset command.
Figure 23: PTZ configuration window
Table 13: Description of the PTZ configuration window
Name Description
1. Save preset Saves preset.
2. Call preset Calls up pre-existing preset.
3. Shadow tour toolbar Starts recording the shadow tour.
Saves the shadow tour.
Starts the selected shadow tour.
Deletes the selected shadow tour.