TruVision NVR 22 Series, Руководство пользователя

Страница: 67 / 201

Chapter 10: Camera setup
TruVision NVR 22 (SP) User Manual 63
Figure 21: IP camera window
Table 10: Description of the IP camera window
Option Description
1.
IP camera list This shows the list of IP cameras added to the recorder. The camera
information shown is: Camera No., Status, PoE port, Edit, Advanced Set,
Live View, Camera Name, IP Camera Address, Manage Port, Protocol,
Device Model, Serial Number, and Firmware.
2. Sync Password Sets all connected TruVision IP cameras to the same admin password as
the recorder.
3. Manual Add Add a camera manually to the recorder by entering its IP address and other
required information.
4. Device Search/Add Search the network for available TruVision or other natively supported IP
cameras. Add an IP camera to the recorder system.
5. Upgrade Upgrade IP camera software. Insert USB flash drive in the recorder and
select the upgrade file. The camera will automatically reboot once the
software is upgraded.
6. Delete Delete the selected IP camera from the list.
7. Refresh Update the information displayed on a camera in the recorder device list.
Add IP cameras to the recorder
The following section describes all possibilities for adding cameras to the recorder.
A. IP cameras and their passwords
When you add an IP camera to the recorder via the LAN or PoE ports (for TVN 22S
models), the system automatically checks the camera’s password to ensure that it is
the same as that of the recorder or that it is 1234. There are two scenarios: