![TruVision NVR 22 Series Скачать руководство пользователя страница 87](http://html1.mh-extra.com/html/truvision/nvr-22-series/nvr-22-series_user-manual_1177455087.webp)
Chapter 11: Network settings
TruVision NVR 22 (SP) User Manual
83
Option
Description
1.
Working Mode
Select from Multi-address and Net Fault Tolerance. This option is not
available on the TVN 22S.
Multi-address
: Each LAN port is separate with its own IP address. This
allows one LAN port for the IP cameras and the other for client PCs such
as TruNav.
Net Fault Tolerance
: When one LAN port fails, the other one takes over.
This is the default option.
2.
Select NIC
Select the LAN1 or LAN2.
3.
NIC Type
Network interface card (NIC) is a device used to connect the recorder to a
network. Select the NIC type used from the drop-down list.
4.
Default Route
Select the default LAN connection. LAN1 is default.
Bridge PoE
Camera Network
This is only available for TVN 22S. Select this check box to enable the
Bridge PoE Camera Network.
Default value is Enable.
5.
Enable DHCP
DHCP (Dynamic Host Configuration Protocol) is a protocol for assigning
an IP address dynamically to a device each time it connects to a network.
Select this check box if you have a DHCP server running and want your
recorder to automatically obtain an IP address and other network settings
from that server. The DHCP server is typically available in your router.
Default value is Disable.
6.
IPv4 Address
Enter the IP address for the recorder. This is the LAN IP address of the
recorder.
Default value is 192.168.1.82.
7.
IPv4 Subnet Mask Enter the subnet mask for your network so the recorder will be recognized
within the network.
Default value is 255.255.255.0.
Содержание NVR 22 Series
Страница 1: ...TruVision NVR 22 SP User Manual P N 1073192 EN REV P ISS 15JUN22...
Страница 4: ......