TruVision NVR 22 Series, Руководство пользователя

Страница: 182 / 201

Chapter 18: Using the web browser
178 TruVision NVR 22 (SP) User Manual
IP camera status
The IP camera status menu allows you to add, edit, and remove cameras to the
recorder as well as update the cameras’ firmware.
Figure 41: IP camera window
Option Description
1. Manual Add Manually add an IP camera to the recorder without searching for it. Enter its
parameters: IP Camera No., IP Camera Address, Protocol, Management
Port, User Name, Password, and Transfer Protocol.
2. Modify Change the parameters of a selected IP camera from the list.
3 Delete Delete the selected IP camera from the list.
4. Search/Add Search the network for available IP cameras and add an IP camera to the
recorder. Select a camera, or cameras, from the list and click OK.
The camera parameters shown are: IP Camera Address, Channel Number,
Protocol, Management Port, Subnet Mask, MAC Address, Serial No., and
Firmware Version.
Note : When you add a camera automatically using the Search/Add feature,
the system will check whether the camera password is 1234 or the same as
the recorder. If the camera password is neither, the camera status is
displayed as “Offline” (see Figure 21) and its password needs to be
changed to be the same as the recorder.
5. Advanced Settings Synchronize all supported TruVision and UltraView IP cameras passwords.
6. Custom Protocol Configure custom RTSP streams. See
“Using RTSP custom protocols” on
page 65 for more information.
7. Refresh Update the information displayed on a camera in the recorder device list.
To search the network and add an IP camera:
1. From the menu toolbar, click Remote Configuration > Camera Setup > IP Camera
Status > Search/Add to search for any supported IP cameras located in the
recorder LAN.
2. In the list that appears, select the cameras that you want to add to the recorder.
3. Click OK to add the selected cameras to the list of devices in the recorder. The
cameras are automatically added to the end of the list of devices.