TruVision NVR 22 Series, Руководство пользователя

Страница: 130 / 201

Chapter 14: Device management
126 TruVision NVR 22 (SP) User Manual
Option Description
8. Enable Wizard Immediately start Wizard without rebooting the system.
Select the check box to enable/disable and click
Apply
.
Default is Enable.
9. Start Wizard Now Reboot the system immediately and start Wizard.
Default is Disable.
10. Password Required Define whether a login password is required to open the menu.
Select the check box to enable/disable and click Apply .
Default is Disable.
11. Recording Behavior for
Disable Actions
Define the recording behavior when Disable Actions is used. See page
121 for more information.
Default is
“No influence on recording”.
Configuration files
You can export and import configuration settings from the recorder. This is useful if you
want to copy the configuration settings to another recorder, or if you want to make a
backup of the settings.
Import and export files
Insert an external storage device in the recorder. Go to the Device Management >
Configuration Files to import or export configuration settings. Click Export to export
the recorder’s configuration settings into an external storage device or click
Import to
import configuration settings after selecting a configuration file from the external storage
device.
Restore default settings
The administrator can reset the recorder to the factory default settings. Network
information such as IP address, subnet mask, gateway, MTU, NIC working mode,
server port, and default route are not restored to factory default settings.
To restore parameters to default factory settings:
1. From the menu toolbar, click Device Management > Configuration Files .
Note : Only the administrator can restore the default settings.
2. To restore all parameters to default factory settings:
Click the Default button. Enter the Admin password, click OK , and then click Yes to
confirm that you want to restore all parameters to default.
⎯
Or
⎯
To restore all parameters, except network settings, to default factory settings: