TruVision NVR 22 Series, Руководство пользователя

Страница: 88 / 201

Chapter 11: Network settings
84 TruVision NVR 22 (SP) User Manual
Option Description
8.
IPv4 Default
Gateway Enter the IP address of your network gateway so the recorder will be
recognized within the network. This is typically the IP address of your
router. Consult your router user manual or contact your ISP to get the
required information on your gateway.
Default value is 192.168.1.1.
9.
MAC Address Displays the MAC address. The MAC address is a unique identifier of your
recorder and it cannot be changed.
10.
Preferred DNS
Server Enter the preferred domain name server to use with the recorder. It must
match the DNS server information of your router. Check your router’s
browser interface or contact your ISP for the information.
11.
Server Port Use the server port for remote client software access. The port range is
between 1024 and 65535.
Enter the server port value. The default value is 8000.
12.
Multicast IP Enter a D-class IP address between 224.0.0.0 to 239.255.255.255. Only
specify this option if you are using the multicast function. Some routers
prohibit the use of multicast function in case of a network storm.
13. Enable Telnet For Technical Support purposes only. For security reasons, the Telnet port
is disabled by default.
14. IPv6 Address 1 Enter the IPv6 address for the recorder.
Default value is fe80::240:30ff:fe48:2975/64.
15. IPv6 Address 2 Enter the IPv6 address for the recorder.
16. IPv6 Default
Gateway
Enter the IPv6 address of your network gateway so the recorder will be
recognized within the network. This is typically the IP address of your
router.
17. MTU (Bytes) Enter a value between 500 and 9676. Default is 1500.
18. Alternate DNS
Server
Enter the alternate domain name server to use with the recorder.
19. HTTP Port By default, the HTTP port value is 80.
20. RTSP Service
The RTSP (Real Time Streaming Protocol) is a network control protocol
designed for use in entertainment and communications systems to control
streaming media servers. The default value is 554.
21. Outgoing
Bandwidth Limit
(Kbps)
Outgoing Bandwidth. The default value depends on the recorder model.
3. Click Apply to save the settings and Exit to return to live view.
Add a network storage system
You can use a network storage system (NAS) or storage area network (SAN) to
remotely store recorder recordings.
The recommended brands of storage system to use are:
•
Seagate BlackArmor NAS 220
•
Iomega StorCenter ix2-dl