TruVision NVR 22 Series, Руководство пользователя

Страница: 13 / 201

Chapter 1: Product introduction
TruVision NVR 22 (SP) User Manual 9
Activate the admin password
When you first start up the unit, the Activation window appears. You must define a high-
security admin password before you can access the unit. There is no default password
provided.
A message will appear on-screen when the unit has been activated.
Figure 1: Password activation window
User Name: It is always “admin”. It cannot be
changed. The bar showing password strength
Enter the new admin password and confirm it.
Tips on creating a strong password:

A valid password range must be between 8 and 16 characters. You must use at
least one character from each of the following items: numbers, lower-case letters,
upper-case letters, and special characters : _ - , .* & @ / $ ? Space. The maximum
number of allowed attempts to enter a password is 3. Lockout is 30 minutes when in
web mode and 10 minutes when in OSD mode.

The password is case-sensitive.

Do not use personal information or common words as “password”.

The password cannot contain the username.

We recommend that you do not use a space at the start or end of a password, and
that you reset your password regularly. For high security systems, it is particularly
recommended to reset the password monthly or weekly for better protection.
Note : If you should forget your admin password, please contact Technical Support to
reactivate the unit with a new password.
Go to Chapter 16
“User management” on page 146 for further information on creating
user passwords.
Default network settings
The network settings are:
• IP address - 192.168.1.82
• Subnet mask - 255.255.255.0
• Gateway address - 192.168.1.1