Trumpf TruConvert DC 1000 Series, Руководство оператора

Страница: 97 / 112

10. System configuration
If the combination of devices connected to the system control is
changed, the new system configuration must then be entered
via the web-based user interface.
10.1 Setting the system configuration
Conditions
■
Operation via web-based user interface
■ Devices (AC-DC module, DC-DC modules) are connected to
the system control
1. To switch on the system control and the modules: switch on
the 24 V supply voltage.
1 Most recently saved configura-
tion is displayed as the sug-
gested value. 2 Most recently saved configura-
tion 3 Most recently saved configura-
tion does not match the
detected configuration.
Input screen "System Configuration" Fig. 7-13
The input screen "System configuration" is displayed.
The connected devices do not match the expected configura-
tion, i.e. the most recently saved configuration.
Status LEDs on the system control: All 3 LEDs flash syn-
chronously.
Status LEDs on the DC-DC module: The green and red
LEDs light up and the yellow LED flashes.
2. In "Select configuration", select the present system configura-
tion:
A67-0140-00.BKen-0
01-05 2020-07-01 System configuration
7 ‐ 29