Trumpf TruConvert DC 1000 Series, Руководство оператора

Страница: 103 / 112

13. Device information
13.1 Displaying device information
1. Select > DEVICE INFO .
2. To display the information for a single DC-DC module: Enter
the number of the slave in the "Slave Module Selection"
area under "Slave Number".
3. In the "Serial Numbers" area, read the serial number for the
selected DC-DC module under "DC-DC Module Serial Num-
ber".
4. In the "Software Package" area, read the details on the
installed software package.
Relevant details are: "Integration Level" and "Buildnumber".
5. The software version on the system control can be read in
the "Software System Control" area (part of the "Software
Package").
6. The software version for the selected DC-DC module can be
read in the "Software DC-DC Module Control" area (part of
the "Software Package").
Tip
The serial numbers of the system control and the modules can
also be queried via Modbus
(see "Tab. 7-4", pg. 7 ‐ 12) .
A67-0140-00.BKen-0
01-05 2020-07-01 Device information
7 ‐ 35