Trumpf TruConvert DC 1000 Series, Руководство оператора

Страница: 89 / 112

Slave address = 0
All message numbers of the messages that occurred in the
system are output in an overview list. The message num-
bers are output in the order in which they occurred.
4. Read out message numbers (alarm/warning/info messages 1
to 20) that have occurred on an individual DC-DC module.
Slave address = 1 to n
Output for each DC-DC module are the messages that
occurred in the system and were caused by the respective
DC-DC module. The address represents the message num-
ber that was stored there in the overview list (slave address
= 0). The value stored at this address can be 0 or 1.
Value = 1, this message is pending at the DC-DC module.
Value = 0, this message is not pending at the DC-DC mod-
ule.
5. Reset all messages (see "Tab. 7-6", pg. 7 ‐ 14) :
− Slave address = 0
− Value = 1
All messages are reset. No further messages are pending.
If the cause of a message persists, this message is dis-
played again.
A67-0140-00.BKen-0
01-05 2020-07-01 Displaying and resetting messages
7 ‐ 21
Reset messages