Trumpf TruConvert DC 1000 Series, Руководство оператора

Страница: 111 / 112

2. Messages
A distinction is made between alarm messages and warning
messages.
Power operation is automatically shut off if serious errors occur.
The PCS switches to the alarm state and outputs an alarm
message. Power operation can only be restarted after the cause
of the alarm has been removed and the alarm message has
been reset
(see "State diagram", pg. 7 ‐ 38) .
In case of less severe faults, the power operation is not inter-
rupted, but a warning message is issued.
The messages that are output always consists of an alarm or
warning number and a message text.
When operating the device with the web-based user interface,
the alarm and warning numbers are displayed together with the
message text. In case of control with Modbus, only the numbers
and no text are transmitted.
(see "Displaying and resetting messages", pg. 7
‐
18)
The following tables show the most important alarm and warning
messages, with notes on error causes and how to correct them.
If a message reappears repeatedly after resetting and restarting
the device, please contact TRUMPF Service.
If a message appears whose number is not listed in the table,
please also contact TRUMPF Service.
A67-0140-00.BKen-0
01-05 2020-07-01 Messages
9 ‐ 3
Alarm message
Warning message
Display of alarm and
warning messages
Resetting alarm and
warning messages
List of alarm and warning
messages