TrinityHighway.com
41
December 2021
STEP 14
CAT® Restraining Rod Assembly (Posts 3 & 5)
PARTS
INSTRUCTIONS
HH
4252G
8 EA
1. Assemble the CAT® Restraining Rods (Part KK) as shown above. Posts 3
and 5 not shown for clarity.
2. Ensure the rod is assembled in the narrow portion of the key hole.
3. Tighten the nuts to a snug position, ensuring a minimum of two threads are
showing.
JJ
3360G
4 EA
KK
3275G
2 EA
Use only Trinity Highway parts
that are specified herein for the
CAT®
for
assembling,
maintaining, or repairing the
CAT®. Do not utilize or otherwise
commingle parts from other
systems even if those systems
are Trinity Highway systems.
WARNINGS
Ensure no washers are placed between the nut and the outside face
of the CAT® 12 gauge, Slotted Guardrail-1 or the CAT® 10 Gauge,
Slotted/Welded Guardrail-2.
Ensure nuts are placed on inside and outside of rail panels with lock
washers as shown in detail 1.
Failure to follow this warning could result in serious injury or death in
the event of a vehicle impact with the system
