TrinityHighway.com
7
December 2021
Recommended Tools
Documentation
•
Manufacturer’s CAT® System Product Description Assembly Manual (Current Version).
•
CAT® System Drawing(s). Current Version of Applicable CAT® and CAT® Tail Drawing.
Personal Protective Equipment
•
Eye Protection
•
Work Gloves
•
Safety-Toe Shoes
•
Back Protection
•
Hard Hat
•
Reflective Vest
•
Apron
Miscellaneous
•
Traffic Control Equipment and Plan per state/specifying agency standards and the MUTCD.
•
SAE Combination Wrench Set
•
Socket Set & Socket Wrench
•
Hammer
•
Chalk Line
•
Tape Measure
•
Marking Paint and Pen
•
Straight Edge
•
Level
•
Plumb Line
•
Post Pounder (commonly used for driving posts)
•
Auger
•
Soil Tamper
•
5/8” Alignment Tool (Drift Pin)
•
Locking Pliers
•
Abrasive Blade or Other Tool
•
Drill & 3/16” Drill Bit
Note:
The provided list of tools is a general recommendation and should not be considered an
extensive list. Depending on specific site conditions and the complexity of the assembly specified
by the state/specifying agency, the required tools may vary. Decisions as to what tools are needed
to perform the job are entirely the responsibility of the state/specifying agency and the selected
contractor performing the assembly of the system at the state/specifying agency’s site.
