TrinityHighway.com
34
December 2021
STEP 9B
CAT® Splice Assembly (At Post 6)
PARTS
INSTRUCTIONS
BB
3340G 32 EA
1. Assemble all parts in the configuration and orientation as shown above.
2. Ensure CAT® Hex Bolts (Part MM) with the
CAT®
marking (See CAT®
Hex Bolt Head Detail)
and Plate Washers (Part EE) are used for splices
at Posts 6.
3. Tighten threaded hardware to a snug position with a minimum of two (2)
bolt threads protruding beyond the nut.
EE
3497G 32 EA
MM
3395G 32 EA
Use only Trinity Highway parts that
are specified herein for the CAT® for
assembling, maintaining, or repairing
the CAT®. Do not utilize or otherwise
commingle parts from other systems
even if those systems are Trinity
Highway systems.
WARNINGS
Ensure CAT® Hex Bolts with the
CAT®
marking and Plate
Washers are used for assembling the splices at Post 6. Failure to
follow these warnings could result in serious injury or death in the
event of a vehicle impact with the system
