TrinityHighway.com
27
December 2021
STEP 5B
CAT® Tail - Anchor Bracket Assembly
Connecting to 27 3/4” [705 mm] High Downstream
Single Sided Guardrail
PARTS
INSTRUCTIONS
I
701A
1 EA
1. Assemble the Cable Anchor Bracket (Part I) as shown above, with bracket
on back side of the CAT® Tail Anchor Guardrail and welded plate towards
Post 7.
2. Ensure that flat washers (Part AA) are placed between the bolt head (Part
W) and front side of the CAT® Tail Anchor Guardrail.
3. Tighten all threaded hardware to a snug position with a minimum of two (2)
bolt threads protruding beyond the nut.
W
3380G
8 EA
AA
3300G
8 EA
BB
3340G
8 EA
Use only Trinity Highway parts that
are specified herein for the CAT®
for assembling, maintaining, or
repairing the CAT®. Do not utilize
or otherwise commingle parts from
other systems even if those
systems are Trinity Highway
systems.
WARNINGS
Ensure the Cable Anchor Bracket is assembled between Posts 6
and 7 and the welded plate is towards Post 7. Failure to follow this
warning could result in serious injury or death in the event of a
vehicle impact with the system.
